{"title":"Thomson","description":"","products":[{"product_id":"thomson-alloy-dirt-drop-drop-bar-25d-flare-31-8-x-44cm","title":"Thomson Alloy Dirt Drop Drop Bar 25D Flare 31.8 x 44cm","description":"Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The lineup is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.\u003cbr\u003e\u003cbr\u003eThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.\u003cbr\u003e\u003cbr\u003eThe Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"44cm","offer_id":44468947779741,"sku":"TH-HB-E130","price":108.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Handlebars---Dirt-Drop---Black_1500x1500_68ede91d-2226-4807-b2ca-0d870b9c2fe1.jpg?v=1705406692"},{"product_id":"thomson-alloy-dirt-drop-drop-bar-25d-flare-31-8-x-46cm","title":"Thomson Alloy Dirt Drop Drop Bar 25D Flare 31.8 x 46cm","description":"Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The lineup is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.\u003cbr\u003e\u003cbr\u003eThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.\u003cbr\u003e\u003cbr\u003eThe Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"46cm","offer_id":44468949909661,"sku":"TH-HB-E131","price":108.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Handlebars---Dirt-Drop---Black_1500x1500_b927ee0f-8fa1-478c-b1f5-4e071580acd4.jpg?v=1705406688"},{"product_id":"thomson-alloy-road-drop-bar-round-top-31-8-x-44cm","title":"Thomson Alloy Road Drop Bar Round Top 31.8 x 44cm","description":"Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The lineup is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.\u003cbr\u003e\u003cbr\u003eOur road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.\u003cbr\u003e\u003cbr\u003eThe round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"44cm","offer_id":44468950499485,"sku":"TH-HB-E126","price":108.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Handlebars---Round-Drop---Black_1500x1500_60e37eb2-5eed-4a41-870f-b9b6c628e039.jpg?v=1705406688"},{"product_id":"thomson-carbon-35-handlebar-10-x-800","title":"Thomson Carbon 35 Handlebar 10 x 800","description":"800mm wide, offering 10mm and 20mm of centre rise together with a 9° backsweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain\/trail riding and light enough for racing.\u003cbr\u003e\u003cbr\u003eThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eThe bars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.\u003cbr\u003e\u003cbr\u003eAll carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"10 x 800mm","offer_id":44468950696093,"sku":"TH-HB-E135","price":152.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-35-Handlebar-10-x-800_1000x1000_fbe0a334-5e3d-4105-b471-45f1feb38373.jpg?v=1705406684"},{"product_id":"thomson-carbon-cross-drop-bar-31-8-x-44cm","title":"Thomson Carbon Cross Drop Bar 31.8 x 44cm","description":"For Cyclocross, presenting the carbon CX bar. It’s the natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003eThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eAll carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.\u003cbr\u003e\u003cbr\u003eThe ‘Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders.\u003cbr\u003e\u003cbr\u003eReach for the ‘Cross bars is 78.5mm. Drop is proportional.\u003cbr\u003eThe ‘cross drops are:\u003cbr\u003e44cm - 135mm.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from impact.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468951351453,"sku":"TH-HB-E129","price":241.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-Cross-Drop-Bar-318-x-44cm_1000x1000_aa9fcfc7-5643-486a-8bd5-64adb904695d.jpg?v=1705406682"},{"product_id":"thomson-carbon-cross-drop-bar-31-8-x-42cm","title":"Thomson Carbon Cross Drop Bar 31.8 x 42cm","description":"For Cyclocross, presenting the carbon CX bar. It’s the natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003eThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eAll carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.\u003cbr\u003e\u003cbr\u003eThe ‘Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders.\u003cbr\u003e\u003cbr\u003eReach for the ‘Cross bars is 78.5mm. Drop is proportional.\u003cbr\u003eThe ‘cross drops are:\u003cbr\u003e42cm - 133mm.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from impact.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468951974045,"sku":"TH-HB-E128","price":241.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-Cross-Drop-Bar-318-x-42cm_1000x1000_e614f9e1-bd82-4e9a-a4ec-ce0041e28e54.jpg?v=1705406683"},{"product_id":"thomson-carbon-35-handlebar-20-x-800","title":"Thomson Carbon 35 Handlebar 20 x 800","description":"800mm wide, offering 10mm and 20mm of centre rise together with a 9° backsweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain\/trail riding and light enough for racing.\u003cbr\u003e\u003cbr\u003eThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eThe bars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.\u003cbr\u003e\u003cbr\u003eAll carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"20 x 800mm","offer_id":44468952039581,"sku":"TH-HB-E136","price":152.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-35-Handlebar-20-x-800_1000x1000_1138683e-62b1-458f-8684-bd6c0c1341b9.jpg?v=1705406681"},{"product_id":"thomson-carbon-road-drop-bar-31-8-x-42cm","title":"Thomson Carbon Road Drop Bar 31.8 x 42cm","description":"Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003eThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eAll carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.\u003cbr\u003e\u003cbr\u003eThe Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders.\u003cbr\u003e\u003cbr\u003eReach for the Road bars is 78.5mm. Drop is proportional.\u003cbr\u003eThe road drops are:\u003cbr\u003e\u003cbr\u003e40cm - 137mm.\u003cbr\u003e42cm - 140mm.\u003cbr\u003e44cm - 140mm.\u003cbr\u003e46cm - 143mm.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from impact.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468952105117,"sku":"TH-HB-E105","price":241.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-Road-Drop-Bar-318-x-42cm_1000x1000_2d090906-2756-4cfe-be59-9cb837d73f53.jpg?v=1705406680"},{"product_id":"thomson-carbon-road-drop-bar-31-8-x-40cm","title":"Thomson Carbon Road Drop Bar 31.8 x 40cm","description":"Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003eThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eAll carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.\u003cbr\u003e\u003cbr\u003eThe Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders.\u003cbr\u003e\u003cbr\u003eReach for the Road bars is 78.5mm. Drop is proportional.\u003cbr\u003eThe road drops are:\u003cbr\u003e\u003cbr\u003e40cm - 137mm.\u003cbr\u003e42cm - 140mm.\u003cbr\u003e44cm - 140mm.\u003cbr\u003e46cm - 143mm.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from impact.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468952891549,"sku":"TH-HB-E104","price":241.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-Road-Drop-Bar-318-x-40cm_1000x1000_d491d00f-64a1-4b16-be9e-808703e1b1d3.jpg?v=1705406680"},{"product_id":"thomson-carbon-road-drop-bar-31-8-x-44cm","title":"Thomson Carbon Road Drop Bar 31.8 x 44cm","description":"Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003eThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eAll carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.\u003cbr\u003e\u003cbr\u003eThe Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders.\u003cbr\u003e\u003cbr\u003eReach for the Road bars is 78.5mm. Drop is proportional.\u003cbr\u003eThe road drops are:\u003cbr\u003e\u003cbr\u003e40cm - 137mm.\u003cbr\u003e42cm - 140mm.\u003cbr\u003e44cm - 140mm.\u003cbr\u003e46cm - 143mm.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from impact.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468954529949,"sku":"TH-HB-E106","price":241.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-Road-Drop-Bar-318-x-44cm_1000x1000_752396f2-aef8-426b-91ab-aa84a1477215.jpg?v=1705406674"},{"product_id":"thomson-carbon-road-drop-bar-31-8-x-46cm","title":"Thomson Carbon Road Drop Bar 31.8 x 46cm","description":"Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.\u003cbr\u003e\u003cbr\u003eThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed.\u003cbr\u003e\u003cbr\u003eAll carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.\u003cbr\u003e\u003cbr\u003eThe Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders.\u003cbr\u003e\u003cbr\u003eReach for the Road bars is 78.5mm. Drop is proportional.\u003cbr\u003eThe road drops are:\u003cbr\u003e\u003cbr\u003e40cm - 137mm.\u003cbr\u003e42cm - 140mm.\u003cbr\u003e44cm - 140mm.\u003cbr\u003e46cm - 143mm.\u003cbr\u003e\u003cbr\u003e1.5K woven impact ends help prevent damage to unidirectional fibres from impact.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468954923165,"sku":"TH-HB-E107","price":241.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Carbon-Road-Drop-Bar-318-x-46cm_1000x1000_64691b42-c9b2-4c38-99ee-c1ce67bc7e13.jpg?v=1705406676"},{"product_id":"thomson-elite-35-handlebar-20-x-800","title":"Thomson Elite 35 Handlebar 20 x 800","description":"Our new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° backsweep and 5° upsweep. They’re built using 7050 Aluminium alloy for strength and longevity.\u003cbr\u003e\u003cbr\u003eThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.\u003cbr\u003e\u003cbr\u003eTogether with a 35mm Thomson X4 stem, it’s the best Aluminium cockpit in the industry.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"20 x 800mm","offer_id":44468956790941,"sku":"TH-HB-E133","price":104.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-35-Handlebar-20-x-800_1000x1000_7cab7690-cf30-41d8-bf0b-fbb468b64a16.jpg?v=1705406672"},{"product_id":"thomson-elite-35-handlebar-10-x-800","title":"Thomson Elite 35 Handlebar 10 x 800","description":"Our new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° backsweep and 5° upsweep. They’re built using 7050 Aluminium alloy for strength and longevity.\u003cbr\u003e\u003cbr\u003eThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.\u003cbr\u003e\u003cbr\u003eTogether with a 35mm Thomson X4 stem, it’s the best Aluminium cockpit in the industry.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"10 x 800mm","offer_id":44468956856477,"sku":"TH-HB-E132","price":104.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-35-Handlebar-10-x-800_1000x1000_e023c22f-c956-4cbd-bc88-6c587f7f81fa.jpg?v=1705406676"},{"product_id":"thomson-elite-dh-handlebar-20-x-800","title":"Thomson Elite DH Handlebar 20 x 800","description":"Our Downhill bar is 800mm wide with 20mm of rise, 9° of backsweep, and 5° of upsweep. It’s built using 7050 Aluminium alloy for strength and long life. 65mm wide clamping area fits our Direct Mount stem, giving you the most torsional stiffness of any bar\/stem combination. 31.8 centre section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems.\u003cbr\u003e\u003cbr\u003eBars are butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.\u003cbr\u003e\u003cbr\u003eBars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent, and bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.\u003cbr\u003e\u003cbr\u003eTogether with a Thomson stem, this is the best Aluminium cockpit you can get. It’s the perfect addition to your Elite X4 Stem or Direct Mount Stem.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468956922013,"sku":"TH-HB-E115","price":97.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-DH-Handlebar-20-x-800_1000x1000_88db38cf-9d40-4086-a753-8e7ab030e3e9.jpg?v=1705406671"},{"product_id":"thomson-elite-35-handlebar-35-x-800","title":"Thomson Elite 35 Handlebar 35 x 800","description":"Our new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° backsweep and 5° upsweep. They’re built using 7050 Aluminium alloy for strength and longevity.\u003cbr\u003e\u003cbr\u003eThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.\u003cbr\u003e\u003cbr\u003eTogether with a 35mm Thomson X4 stem, it’s the best Aluminium cockpit in the industry.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"35 x 800mm","offer_id":44468957773981,"sku":"TH-HB-E134","price":104.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-35-Handlebar-35-x-800_1000x1000_a9997a21-22b6-44c7-a486-e0133e661546.jpg?v=1705406857"},{"product_id":"thomson-elite-seatpost-inline-black-25-4-x-330","title":"Thomson Elite Seatpost Inline Black 25.4 x 330","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468958658717,"sku":"TH-SP-E150-BK","price":82.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-254-x-330_1000x1000_fedeaa2a-08ae-4b86-a805-88e327cd3b0a.jpg?v=1705406854"},{"product_id":"thomson-elite-seatpost-inline-black-27-x-410","title":"Thomson Elite Seatpost Inline Black 27 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468958691485,"sku":"TH-SP-E114-BK","price":82.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-27-x-410_1000x1000_8864a09a-c45f-4a49-b764-f85479c7e468.jpg?v=1705406855"},{"product_id":"thomson-elite-seatpost-inline-black-27-2-x-330","title":"Thomson Elite Seatpost Inline Black 27.2 x 330","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468958953629,"sku":"TH-SP-E101-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-272-x-330_1000x1000_c3efc2d3-7de1-442c-a3ab-9ae957db5a17.jpg?v=1705406854"},{"product_id":"thomson-elite-seatpost-inline-black-27-2-x-410","title":"Thomson Elite Seatpost Inline Black 27.2 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468959740061,"sku":"TH-SP-E113-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-272-x-410_1000x1000_4dedad64-e586-453e-a7aa-21845b7cd3af.jpg?v=1705406852"},{"product_id":"thomson-elite-seatpost-inline-black-30-9-x-367","title":"Thomson Elite Seatpost Inline Black 30.9 x 367","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468960067741,"sku":"TH-SP-E128-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-309-x-367_1000x1000_25621384-9c44-4a17-b3cb-f361cebb8cec.jpg?v=1705406849"},{"product_id":"thomson-elite-seatpost-inline-black-30-9-x-410","title":"Thomson Elite Seatpost Inline Black 30.9 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468960264349,"sku":"TH-SP-E127-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-309-x-410_1000x1000_778d9986-12cb-45df-a04e-90c447937b72.jpg?v=1705406851"},{"product_id":"thomson-elite-seatpost-inline-black-31-6-x-410","title":"Thomson Elite Seatpost Inline Black 31.6 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468961575069,"sku":"TH-SP-E116-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-316-x-410_1000x1000_e217f2b5-24e3-48cd-a71b-1c3ee2f32358.jpg?v=1705406843"},{"product_id":"thomson-elite-seatpost-inline-silver-27-2-x-330","title":"Thomson Elite Seatpost Inline Silver 27.2 x 330","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468961640605,"sku":"TH-SP-E101-SL","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Silver-272-x-330_1000x1000_44b39836-a516-48f0-b39e-4935586892e8.jpg?v=1705406847"},{"product_id":"thomson-elite-seatpost-inline-silver-27-2-x-410","title":"Thomson Elite Seatpost Inline Silver 27.2 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468961673373,"sku":"TH-SP-E113-SL","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Silver-272-x-410_1000x1000_3299ff91-447d-415d-9a22-23a72b111538.jpg?v=1705406848"},{"product_id":"thomson-elite-seatpost-inline-silver-30-9-x-410","title":"Thomson Elite Seatpost Inline Silver 30.9 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468962525341,"sku":"TH-SP-E127-SL","price":79.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Silver-309-x-410_1000x1000_f813c410-795c-4701-90b9-dc18268ee247.jpg?v=1705406843"},{"product_id":"thomson-elite-seatpost-setback-black-27-2-x-250","title":"Thomson Elite Seatpost Setback Black 27.2 x 250","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468962689181,"sku":"TH-SP-E102SB-BK","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Black-272-x-250_1000x1000_55866bc8-d59c-4c19-ba83-7f63e7da7b3b.jpg?v=1705406846"},{"product_id":"thomson-elite-seatpost-inline-black-31-6-x-367","title":"Thomson Elite Seatpost Inline Black 31.6 x 367","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468963279005,"sku":"TH-SP-E109-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Black-316-x-367_1000x1000_3d2c9215-0025-450a-a6e0-32ba980902fe.jpg?v=1705406842"},{"product_id":"thomson-elite-seatpost-setback-black-27-2-x-410","title":"Thomson Elite Seatpost Setback Black 27.2 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468963311773,"sku":"TH-SP-E113SB-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Black-272-x-410_1000x1000_df3d9414-17a7-4d52-b7ad-eb3e40b4a64b.jpg?v=1705406843"},{"product_id":"thomson-elite-seatpost-setback-black-27-2-x-330","title":"Thomson Elite Seatpost Setback Black 27.2 x 330","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468963442845,"sku":"TH-SP-E101SB-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Black-272-x-330_1000x1000_da24426d-7aff-4421-ace9-67a096dc49fe.jpg?v=1705406839"},{"product_id":"thomson-elite-seatpost-inline-silver-31-6-x-367","title":"Thomson Elite Seatpost Inline Silver 31.6 x 367","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468963475613,"sku":"TH-SP-E109-SL","price":82.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Inline-Silver-316-x-367_1000x1000_22316e85-5774-4268-85a6-0a9ca28668c9.jpg?v=1705406841"},{"product_id":"thomson-elite-seatpost-setback-black-30-x-410","title":"Thomson Elite Seatpost Setback Black 30 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468963573917,"sku":"TH-SP-E149SB-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Black-30-x-410_1000x1000_4b88af85-ff57-4a8a-8598-2843e66ac31c.jpg?v=1705406840"},{"product_id":"thomson-elite-seatpost-setback-black-30-9-x-410","title":"Thomson Elite Seatpost Setback Black 30.9 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468965408925,"sku":"TH-SP-E127SB-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Black-309-x-410_1000x1000_27cb0163-793c-4cb7-ac5f-b8fac92ab597.jpg?v=1705406839"},{"product_id":"thomson-elite-seatpost-setback-silver-27-2-x-410","title":"Thomson Elite Seatpost Setback Silver 27.2 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468965671069,"sku":"TH-SP-E113SB-SL","price":86.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Silver-272-x-410_1000x1000_0aa0c85c-12cc-4029-8f39-783f04b35c09.jpg?v=1705406838"},{"product_id":"thomson-elite-seatpost-setback-black-31-6-x-367","title":"Thomson Elite Seatpost Setback Black 31.6 x 367","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468966457501,"sku":"TH-SP-E109SB-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Black-316-x-367_1000x1000_b27d881b-eb76-490d-87d6-9f0022e7d9b5.jpg?v=1705406838"},{"product_id":"thomson-elite-seatpost-setback-black-31-6-x-410","title":"Thomson Elite Seatpost Setback Black 31.6 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468967637149,"sku":"TH-SP-E116SB-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Black-316-x-410_1000x1000_18b59ce8-d565-496a-a631-ab937811ff57.jpg?v=1705406835"},{"product_id":"thomson-elite-seatpost-setback-silver-31-6-x-410","title":"Thomson Elite Seatpost Setback Silver 31.6 x 410","description":"The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.\u003cbr\u003e\u003cbr\u003eThe Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eIt’s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.\u003cbr\u003e\u003cbr\u003eWe have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.\u003cbr\u003e\u003cbr\u003eThe Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.\u003cbr\u003e\u003cbr\u003eInfinite tilt adjustment minus 5° and plus 29°.\u003cbr\u003e\u003cbr\u003eVery low profile clamps means no seat interference as the swivel nuts are down between the seat rails.\u003cbr\u003e\u003cbr\u003eThe designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.\u003cbr\u003e\u003cbr\u003eImpact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468967768221,"sku":"TH-SP-E116SB-SL","price":86.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Seatpost-Setback-Silver-316-x-410_1000x1000_96346ae7-44ff-41d6-9900-bb3a82b114cb.jpg?v=1705406833"},{"product_id":"thomson-elite-stem-35mm-x4-black-0-x-32-x-35","title":"Thomson Elite Stem 35mm X4 Black 0 x 32 x 35","description":"\u003cp\u003eToo many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.The Thomson 35mm X4 stem allows you to realize the benefits of stiffer forks and stiffer 35mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Certified to: CEN ISO 4210-5.The Thomson 35mm X4 is based on proven design. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.This stem body is forged AL7050 where every surface is machined. The faceplate is forged from AL6066 and 100% machined. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain biking.\u003c\/p\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468967833757,"sku":"TH-SM-E176-BK","price":101.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---35mm---Black_1932x1932_e2f82052-8f83-4d74-8a7d-46df18f02d54.jpg?v=1705406837"},{"product_id":"thomson-elite-stem-35mm-x4-black-0-x-40-x-35","title":"Thomson Elite Stem 35mm X4 Black 0 x 40 x 35","description":"\u003cp\u003eToo many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.The Thomson 35mm X4 stem allows you to realize the benefits of stiffer forks and stiffer 35mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Certified to: CEN ISO 4210-5.The Thomson 35mm X4 is based on proven design. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.This stem body is forged AL7050 where every surface is machined. The faceplate is forged from AL6066 and 100% machined. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain biking.\u003c\/p\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468968784029,"sku":"TH-SM-E177-BK","price":101.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---35mm---Black_1932x1932_eb275f02-9665-4cbf-b723-84ebd2420291.jpg?v=1705406836"},{"product_id":"thomson-elite-stem-bmx-black-0-x-50-x-22-2","title":"Thomson Elite Stem BMX Black 0 x 50 x 22.2","description":"\u003cp\u003eThe Thomson BMX stem is machined from 7000 series aluminium and is a one-piece design with no welds or joints.The 50mm wide clamp length and patented undercut around the handlebar combine to grip the handlebar more securely. Thomson’s “two clamps in one” design provides a stiff ride with minimal flexing or squeaking.Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB.The Thomson stem has passed extensive life and ultimate strength tests. An on-going testing program ensures that every production lot of stems meets Thomson standards.The stem is anodized to prevent corrosion and maintains a nice appearance. Thomson BMX stems are available with a black or silver anodized finish.Six M6 bolts hold the handlebar firmly in place. The BMX Stem is lightweight, weighing 255g.Built-in spacer on the stem body clears gyro and eliminates the need for a separate loose spacer.Every component of the Thomson BMX stem, including the fasteners, is 100% American made.The Thomson stem is designed to have the best combination of stiffness, strength, and durability.\u003c\/p\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468969439389,"sku":"TH-SM-E156-BK","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-BMX---Black_1500x1500_646c5879-776a-4f6b-90e4-dc09429c2e28.jpg?v=1705406832"},{"product_id":"thomson-elite-stem-x4-black-0-x-100-x-31-8","title":"Thomson Elite Stem X4 Black 0 x 100 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468971471005,"sku":"TH-SM-E133-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_04610aa1-17e0-4682-8168-d3fce51532c9.jpg?v=1705406830"},{"product_id":"thomson-elite-stem-x4-black-0-x-40-x-31-8","title":"Thomson Elite Stem X4 Black 0 x 40 x 31.8","description":"\u003cp\u003eToo many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB.The Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003c\/p\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468971798685,"sku":"TH-SM-E174-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Stem-X4-Black_763x763_218e4b84-dbf2-487a-87ae-29d16030cf3d.jpg?v=1705406828"},{"product_id":"thomson-elite-stem-x4-black-0-x-60-x-31-8","title":"Thomson Elite Stem X4 Black 0 x 60 x 31.8","description":"\u003cp\u003eToo many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB.The Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003c\/p\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468971929757,"sku":"TH-SM-E164-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Stem-X4-Black_763x763_8b387f43-e6ee-4e73-b97f-a90b5179b114.jpg?v=1705406827"},{"product_id":"thomson-elite-stem-x4-black-0-x-50-x-31-8","title":"Thomson Elite Stem X4 Black 0 x 50 x 31.8","description":"\u003cp\u003eToo many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB.The Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003c\/p\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468972454045,"sku":"TH-SM-E130-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Elite-Stem-X4-Black_763x763_bdb80f93-74c1-42bc-bb24-8a9d6b124d01.jpg?v=1705406825"},{"product_id":"thomson-elite-stem-x4-black-0-x-80-x-31-8","title":"Thomson Elite Stem X4 Black 0 x 80 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468972880029,"sku":"TH-SM-E157-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_78d5ae12-0c75-4220-a4b9-b03f5119a4eb.jpg?v=1705406829"},{"product_id":"thomson-elite-stem-x4-black-10-x-110-x-31-8","title":"Thomson Elite Stem X4 Black 10 x 110 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468972978333,"sku":"TH-SM-E140-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_59ae19e7-1a76-424a-bc92-8cf5c2dcbf4f.jpg?v=1705406828"},{"product_id":"thomson-elite-stem-x4-black-10-x-130-x-31-8","title":"Thomson Elite Stem X4 Black 10 x 130 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468973371549,"sku":"TH-SM-E142-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_e624a494-0768-4a30-bbdd-3467ac33dacd.jpg?v=1705406825"},{"product_id":"thomson-elite-stem-x4-black-0-x-90-x-31-8","title":"Thomson Elite Stem X4 Black 0 x 90 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468973404317,"sku":"TH-SM-E132-BK","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_b403bcbb-db1c-4494-9590-49b2d3678239.jpg?v=1705406828"},{"product_id":"thomson-elite-stem-x4-black-0-x-70-x-31-8","title":"Thomson Elite Stem X4 Black 0 x 70 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468973469853,"sku":"TH-SM-E131-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_0f5d530f-94d2-43c5-a7c1-3d12ed79acd6.jpg?v=1705406825"},{"product_id":"thomson-elite-stem-x4-black-10-x-90-x-31-8","title":"Thomson Elite Stem X4 Black 10 x 90 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468975599773,"sku":"TH-SM-E138-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_e830ac02-702d-4330-9959-41a18e7dbbd3.jpg?v=1705406824"},{"product_id":"thomson-elite-stem-x4-black-10-x-80-x-31-8","title":"Thomson Elite Stem X4 Black 10 x 80 x 31.8","description":"Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness.\u003cbr\u003e\u003cbr\u003eThe Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.\u003cbr\u003e\u003cbr\u003eCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB\u003cbr\u003e\u003cbr\u003eThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently.\u003cbr\u003e\u003cbr\u003eThe stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding.\u003cbr\u003e\u003cbr\u003e","brand":"Thomson","offers":[{"title":"Default Title","offer_id":44468976287901,"sku":"TH-SM-E163-BK","price":77.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/9434\/1977\/files\/Thomson---Stems---Elite-X4---Black_1500x1500_a7531f49-34cf-4b97-9995-05f8b546c403.jpg?v=1705406819"}],"url":"https:\/\/www.bikeparts.co.uk\/collections\/thomson.oembed?page=3","provider":"BikeParts.co.uk","version":"1.0","type":"link"}