Gtechniq Gtechniq Complete Bike Care Kit

Clean; maintain and protect your bike with the Gtechniq Complete Bike Care Kit. It brings together bike-specific cleaners; detailing accessories and protective products to help tackle dirt on the frame and drivetrain; refresh riding gear and add a protective finish.

Use Bike Clean and pH-neutral Bike Wash to remove dirt from your bike; and Drivetrain Degreaser to break down grease and oil on the chain; cassette and derailleurs. The microfibre wash mitt and detailing brush help you clean the frame and reach smaller areas; while the drying towel absorbs water after washing.

Tri-Clean helps clean and freshen helmets; trainers; shoes and other non-washable items. Finish with Ceramic Quick Coat; which leaves a hydrophobic layer that helps repel dirt and road grime. It provides up to six months of protection; depending on riding conditions and maintenance.

The Gtechniq Bike range is suitable for use on all paint finishes and paint protection films.

• A complete selection of bike cleaning and protection essentials
• Bike Clean and pH-neutral Bike Wash for frame and component cleaning
• Drivetrain Degreaser breaks down grease and oil
• Microfibre wash mitt and detailing brush help clean different areas of the bike
• Tri-Clean helps clean and freshen helmets; trainers; shoes and other non-washable items
• Ceramic Quick Coat provides up to six months of protection
• Suitable for all paint finishes and paint protection films

• Bike Clean ? 1 litre
• Bike Wash ? 250 ml
• Drivetrain Degreaser ? 500 ml
• Ceramic Quick Coat ? 250 ml
• Tri-Clean ? 500 ml
• Microfibre wash mitt
• Detailing brush
• Drying towel
• Microfibre cloth

Rinse the bike to remove loose dirt. Add two capfuls of Bike Wash to a 20-litre bucket and fill with warm water. Wash the bike with the microfibre wash mitt; then rinse thoroughly.

For targeted cleaning; apply Bike Clean to the bike and allow it to work for 3?5 minutes. Use the detailing brush to agitate stubborn dirt if needed; then rinse thoroughly with low-pressure water. Avoid directing high-pressure water at bearings; the bottom bracket or headset.

Shake Drivetrain Degreaser well and apply it to the chain; cassette and derailleurs. Agitate with the detailing brush or a suitable chain-cleaning tool; then rinse thoroughly. Dry the bike with the drying towel.

To clean riding gear; shake Tri-Clean well and spray it onto a damp microfibre cloth. Wipe the surface; gently agitate and repeat if necessary. Use a clean cloth to leave the surface dry.

Once the bike is clean and dry; shake Ceramic Quick Coat well. Apply it to the microfibre cloth; spread it across the frame and other exterior surfaces; then buff away any excess with a clean side of the cloth. Apply out of direct sunlight.