Praxis - BB M30 THRU - BB Right

This is our M30-THRU BB for installing 30mm cranks into BBRight Road frames.

30mm DRIVE / 30mm Non-DRIVE

Also good for other brand 30mm cranks like SRAM, RaceFace/Easton Cinch cranks, Rotor Rex/3D+ cranks, and CaneCreek eeWings. See full spec and notes below.

79mm Width x 46mm Diameter

BEARINGS: Cartridge Steel

30mm DRIVE/30mm Non-DRIVE

TOOL: This specific BB has our collet design and requires a press tool/drift for installation along with a 2pk M30 Socket Tools or 2 M30 Wrench Tools.
Please read the instructions carefully for installation.

MFG: Forged & machined heat-treated alloy cups

AVG. WEIGHT: 130g

NOTE:

Praxis Collet Design

- This BB cannot be used for MTB Cranks

- SPINDLE MEASUREMENT CHECK : 103mm or longer for Road

- OTHER BRAND CRANKS -READ & FOLLOW YOUR CRANK INSTRUCTIONS You must read and follow the crank instructions that came with your specific brand and model of crank to determine the correct setup. Praxis provides 2mm dust covers for each side as base setup, but every brand has its own specific crank setup. You may need additional spacers depending on your brand crank. So please follow your brand instructions.